Oils and Lubricants Archives - Grupo SPD EN

Olein

anamendes — Thu, 13 Jan 2022 10:15:17 +0000

Oleic Acid, CH3-(CH2)7-CH=CH-(CH2)7-COOH.

CAS: 112-80-1

The post Olein appeared first on Grupo SPD EN.

F74 – Copper Mass

Artur Filipe — Tue, 19 Oct 2021 10:17:18 +0000

It is an aerosol micronized copper solution, resistant up to 1000ºC. It has excellent penetrating power in screws, dowels, rings and chain links, preventing them from seizing. F74 always maintains an optimal lubricating capacity. It is particularly suitable for the lubrication of exposed areas, for long periods of time at high temperatures, such as exhaust pipe screws, boiler valves or gaskets, furnace feed chains, etc. In the plastic extrusion sector, in cases of the presence of high temperatures, F74 proves to be excellent for guaranteeing good lubrication of the dowels and mold fixings for a long time. F74 has E.P., anti-wear properties and a high hydro repellency. Does not harden or dry. Preserves pitting and oxidation preventing corrosion of metals. It does not cause dirt or residue formation even after a long period at high temperatures. It has a dissolving power even to other pre-existing residues, maintaining good repellency to dust and dirt.

The post F74 – Copper Mass appeared first on Grupo SPD EN.

F4 – Unlocking Lubricant

Artur Filipe — Tue, 19 Oct 2021 09:59:19 +0000

LUBRICANT, ANTICORROSIVE, PENETRATING, PROTECTIVE: Creates a protective film, for a period of time, effective against water, ice, humidity and oxidation. Protects metals and their imperfections. UNLOCKING: Penetrates by attacking rust and any other type of oxidation allowing to unlock any part or mechanism that has seized, blocked, oxidized or frozen. Once unlocked, the mechanism, thanks to its lubricating property, returns to its normal operation. WATER REPELLENT – ANTI MOISTURE: Creates a protective film between the surface and moisture, eliminating problems caused by this (especially short circuits caused by the presence of moisture) CLEANER: Its formula allows cleaning of all surfaces and elimination grease and dirt preventing the formation of oxidation. Great for removing and removing tar stains, resins, encrusted insects, etc …

The post F4 – Unlocking Lubricant appeared first on Grupo SPD EN.

F54 – Lithium Grease

Artur Filipe — Fri, 18 Jun 2021 16:22:32 +0000

F54 contains ultra-pure lithium grease, synthetic fatty acid esters and special adhesive components with a blend of refined oils. Resistant to heat, at temperatures between 160º to 180º C. It guarantees mechanical stability, even in the presence of vibrations, and is resistant to water and salt. Great anti-corrosion and long-lasting power.

The post F54 – Lithium Grease appeared first on Grupo SPD EN.

F70 – Mass for Chains

Artur Filipe — Fri, 18 Jun 2021 15:12:17 +0000

The F70 withstands temperatures up to 300°C and can increase the time interval between applications. Ensures clean lubrication and non-stick dust, resists the action of washing with water. Its multiple qualities make it an all-purpose lubricant product that can be used in a wide variety of sectors and applications. Does not damage the “o-rings”

The post F70 – Mass for Chains appeared first on Grupo SPD EN.

F79 – Anti-slip For Belts

Artur Filipe — Fri, 18 Jun 2021 14:12:42 +0000

It is the most concentrated spray silicone-based product on the market. Its pure formulation allows it to lubricate or brighten without staining. It repels dust, does not clump together and increases slip, canceling out friction. Does not solidify, even when exposed to high temperatures. It can be used on vertical surfaces, having a great adhesive power. Its lubricating power is such that it can replace specific oils under certain conditions. It is even used as a light cutting oil in aluminum metalwork sectors. It maintains its appearance at temperatures between -38ºC and 270ºC. It is also excellent as a waterproofing for fabrics and skins, in general it repels moisture from any surface. It has an antistatic effect.

The post F79 – Anti-slip For Belts appeared first on Grupo SPD EN.

Descofrex – Release Oil

Artur Filipe — Fri, 04 Jun 2021 07:29:51 +0000

Mold release agent for all types of molds and pouring holes, including plastics and fiberglass. It is also indicated as a lubricant for clay, used in the manufacture of tiles and bricks, giving it plasticity, less wear on the knife and minimizing breakage.

The post Descofrex – Release Oil appeared first on Grupo SPD EN.

Sweet Almond Oil

Artur Filipe — Mon, 31 May 2021 10:38:42 +0000

Mixture of fatty acids, mostly oleic acid.

The post Sweet Almond Oil appeared first on Grupo SPD EN.

Cedoline

Artur Filipe — Mon, 17 May 2021 07:53:45 +0000

It is intended for cleaning and preserving all types of furniture and polished wood, reviving its shine and prolonging its life span.

The post Cedoline appeared first on Grupo SPD EN.

Purified White Vaseline

Artur Filipe — Fri, 07 May 2021 08:26:15 +0000

Purified vaseline that protects and softens the skin. It can be used as a protective cream for both the lips and other skin surfaces.

The post Purified White Vaseline appeared first on Grupo SPD EN.